基于熵权的料场方案模糊多属性优选研究

砂石料场方案选择中存在着许多难以精确度量的模糊性因素，常规的平衡法、系统分析法很难对此进行有效的处理。将模糊数学理论应用于砂石料场的方案选择，提出了熵权与模糊理论相结合的砂石料场方案优选方法，重点对标准化属性矩阵的产生、主客观权重结合得到综合权重及相对接近度的计算等几个方面进行了说明，并通过实例验证了该方法的可行性与实用性。     

An analytical expression for the power coefficient of an ideal horizontal-axis wind turbine

The paper shows that an analytical evaluation of the power coefficient C_p for an ideal horizontal-axis wind turbine can be made via an expression giving the direct relationship of C_p and the axial induction factor a. The results obtained agree closely with those obtained numerically from the usual integral expression involving several variables.     

市内通信电缆绝缘电阻特殊要求的实现和措施

本文对市内通信电缆的各生产过程进行分析、研究和控制 ,从而提出了解决绝缘电阻特殊要求的方法 ,以及改进的措施。     

Prediction of foam growth and its nucleation in free and limited expansion

The influence volume approach (IVA) is often utilized for modeling the mass transfer process dictating bubble growth dynamics in physical foaming. However, the assumed concentration profile in the IVA method is only valid when the changes in dissolved gas concentration are small (less than 5%). In addition, the validity of the IVA method is difficult to justify in chemical foaming applications because of the difficulties involved in defining the dissolved gas concentration profile.In the present work, we define two distinct stages of bubble growth for physical foaming. These two stages are termed as free and limited expansion and are controlled by the bubble nucleation rate. Bubble nucleation is assumed to occur only in the free expansion stage. In this stage, the bubble pressure drops substantially from an initially high pressure in the supersaturated state while the dissolved gas concentration changes very little. The second stage of our two-stage mass transfer model is termed the limited expansion stage and accounts for bubble growth in the late stages of foam evolution, when the pressure changes become small. However, in the limited stage of bubble growth the dissolved gas concentration drops significantly, as the available dissolved gas is depleted. To summarize our two-stage mass transfer model of foam expansion, the pressure difference between the bubble phase and the liquid phase is the primary mechanism for driving mass transfer in the early (free) stages of foam growth and the concentration difference is the driver for bubble growth in the late (limited) stages of growth. The first stage can be regarded as the nucleation stage and it is relatively short; while the second stage can be regarded as the bubble growth stage and is much longer. Most of the bubble volume expansion takes place in the second stage.The concentration gradient at the bubble edge, which is often ignored in other models, is analyzed in detail in this paper. The details of our novel mass transfer model are also presented.     

A COMPUTER-AIDED UNIFIED APPROACH TO MODELING PWM AND RESONANT CONVERTERS

This letter puts forward a method of modeling for the steady-state and small signal dynamic analysis on PWM, quasi-resonant and series/（parallel） resonant switching converters based on pulse-waveform integral approach. As an example, PWM and quasi-resonant converters are used to discuss the principle of the approach. The results are compared with those in the relative literatures. Computer aided analysis are made to confirm the correctness.     

ANOM在质量控制中的应用

ANOM（均值分析）是一种有效的质量工具，可以用来分析实验因素对输出的影响是否显著。可以应用于单因子，双因子的实验设计，无论是计量值数据，还是计数值数据，ANOM检验异常值的能力都很强，介绍了ANOM的基本分析过程，对ANOM和ANOVA进行了检验异常值灵敏度大小的比较，同时给出了实例。     

Complementary modelling of fluid separation processes

Optimal functioning of numerous technological processes depends primarily on relevant process design, properly selected column internals and sufficient understanding of the process behaviour. This can be achieved only with the help of accurate and reliable process models capable of considering process rates in a rigorous way, with respect to both transport phenomena and chemistry. In this article, a new modelling concept called complementary modelling is suggested for a large class of fluid separation processes. Since the conditions and criteria for these processes vary considerably, it is impossible to develop a unified modelling approach. Instead, a reasonable and effective combination of different modelling approaches provides solutions to many present and future tasks. The complementary modelling is discussed in detail and illustrated with several case studies.     

MTBE生产工艺的技术改进

通过对传统MTBE装置工艺流程进行分析 ,找出了各个操作单元存在的问题 ,并结合实际操作数据 ,逐一提出了具体的解决方案 ,进一步优化了传统醚化装置工艺流程。达到了生产装置规模不变 ,而投资大大减少的目的。给今后新上同类装置的工艺流程设计 ,提供了较好的技术借鉴。     

提高自主创新能力，加速变频器制造业持续快速发展

创新是企业发展不竭的动力，是增强企业竞争力的关键因素。本文就变频器企业在当前激烈的市场矗虿中，如何做好自主创新工作进行了探讨。在简要阐述自主创新的重要意义后，分析了变频器企业目前发展的现状和存在的问题。针对问题提出了变频器企业在开展自主创新时，可供参考的一些基本思路和途径。     

高性能磁性液体材料研究进展

解决纳米磁性粒子的耐氧化问题对制备高性能磁性液体具有重要意义。系统介绍了金属磁性液体和氮化铁磁性液体的制备方法，并对各种制备方法进行了评述。综述了磁性液体的耐氧化研究进展，主要是纳米金属粒子的无机物包覆和氮化铁磁性液体的抗氧化剂添加；展望了高性能磁性液体在耐氧化方面的研究趋势。